doc. Ing. Tereza Unger Uhlířová, Ph.D.

Education and degrees

2008–2011 B.Sc. thesis at UCT VŠCHT Praha; Faculty of Chemical Technology, specialization: Drug synthesis and production, topic: “Rheology of ceramics suspensions with additions of mono-,di- and polysaccharides”.
2011–2013 M.Sc. thesis at UCT VŠCHT Praha; Faculty of Chemical Technology, specialization: Drug production, topic: “Highly porous cellular ceramics prepared via biological foaming”.
2013–2019 PhD thesis at UCT VŠCHT Praha; Faculty of Chemical Technology, specialization: Chemistry and technology of inorganic materials, topic: “Characterization and modelling of dense, porous and cellular ceramics”.
2024 Appointment as Associate Professor in the field of "Chemistry and Technology of Inorganic Materials"

International internships

2015 – 2 months internship at ENSCI (Limoges, France) – Erasmus project
2018 – 2 weeks internship at Universidad Nacional de Mar del Plata (Mar del Plata, Argentina) – UCT Prague project
2022 – 3 months internship at Department of Industrial Engineering, University of Padua (Padua, Italy) – JECS Trust project

Awards and scholarships

1^st place: Student scientific conference, Department of glass and ceramics, UCT Prague, 2013, poster
2^nd place: 9^th Conference on Polysaccharides-Glycoscience, Prague, 2013, oral presentation
1^st place: 7^th International Workshop on Advanced Ceramics, Limoges, France, 2016, poster
Preciosa Foundation Award – for dissertation
Preciosa Foundation scholarship in academic years 2013/14, 2014/15 a 2015/16

Publications

WoS, Scopus, ORCID

Impact Factor journal articles (the last 5 years)

Kotrbová, L.; Pabst, W.; Uhlířová, T.; Nečina, V.; Gregorová, E.; Šimonová, P. Temperature dependence of elastic moduli and Poisson ratio of sandstone measured via the impulse excitation technique (IET). Int. J. Rock Mech. Mining Sci 2024, xx ((submitted)), xxx–xxx. DOI:
Uhlířová, T.; Pabst, W. Direct measurement of negative Poisson ratios of auxetic materials via the impulse excitation technique (IET). J. Eur. Ceram. Soc. 2024, 44 (4), 2338–2345. DOI: 10.1016/j.jeurceramsoc.2023.10.076
Gregorová, E.; Šimonová, P.; Pabst, W.; Uhlířová, T.; Nečina, V. Temperature dependence of Young’s modulus and the occurrence of an elastic anomaly in porous alumina-mullite composites prepared by starch consolidation. Ceram. Int. 2024, 50 (4), 6309–6323. DOI: 10.1016/j.ceramint.2023.11.359
Šimonová, P.; Uhlířová, T.; Pabst, W. Computer modeling of Young's modulus and thermal conductivity changes during sintering without shrinkage. J. Eur. Ceram. Soc. 2023, 43 (11), 4885–4895. DOI: 10.1016/j.jeurceramsoc.2023.04.018
Pabst, W.; Gregorová, E.; Šimonová, P.; Uhlířová, T. Monitoring the ferroelectric phase transition of barium titanate ceramics via impulse excitation. Ferroelectrics 2023, 611 (1), 171–187. DOI: 10.1080/00150193.2023.2201780
Nečina, V.; Gass, S. E.; Uhlířová, T.; Talou, M. H.; Camerucci, M. A.; Tomba Martinez, A. G. High-temperature mechanical behavior of partially sintered ceramics. J. Mater. Sci. 2023, 58 (12), 5208–5218. DOI: 10.1007/s10853-023-08382-x
Uhlířová, T.; Šimonová, P.; Pabst, W. Modeling of elastic properties and conductivity of partially sintered ceramics with duplex microstructure and different grain size ratio. J. Eur. Ceram. Soc. 2022, 42 (6), 2946-2956. DOI: 10.1016/j.jeurceramsoc.2022.01.053
Pabst, W.; Hříbalová, S.; Uhlířová, T. Quasi-laminate and quasi-columnate modeling of dielectric and piezoelectric properties of cubic-cell metamaterials. J. Eur. Ceram. Soc. 2022, 42 (4), 1396-1406. DOI: 10.1016/j.jeurceramsoc.2021.12.013
Pabst, W.; Uhlířová, T. Benchmark polynomials for the porosity dependence of elastic moduli and conductivity of partially sintered ceramics. J. Eur. Ceram. Soc. 2021, 41 (15), 7967-7975. DOI: 10.1016/j.jeurceramsoc.2021.08.028
Hříbalová, S.; Uhlířová, T.; Pabst, W. Computer modeling of systematic processing defects on the thermal and elastic properties of open Kelvin-cell metamaterials. J. Eur. Ceram. Soc. 2021, 41 (14), 7130-7140. DOI: 10.1016/j.jeurceramsoc.2021.07.031
Uhlířová, T.; Pabst, W. Phase mixture modeling of the grain size dependence of Young's modulus and thermal conductivity of alumina and zirconia ceramics. J. Eur. Ceram. Soc. 2020, 40 (8), 3181–3190. DOI: 10.1016/j.jeurceramsoc.2020.01.069
Uhlířová, T.; Pabst, W. Poisson’s ratio of porous and cellular materials with randomly distributed isometric pores or cells. J. Am. Ceram. Soc. 2020, 103 (12), 6961-6977. DOI: 10.1111/jace.17139
Uhlířová, T.; Pabst, W. Thermal conductivity and Young's modulus of cubic-cell metamaterials. Ceram. Int. 2019, 45 (1), 954–962. DOI: 10.1016/j.ceramint.2018.09.271
Uhlířová, T.; Pabst, W. Conductivity and Young's modulus of porous metamaterials based on Gibson-Ashby cells. Scr. Mater. 2019, 159, 1–4. DOI: 10.1016/j.scriptamat.2018.09.005
Hostaša, J.; Nečina, V.; Uhlířová, T.; Biasini, V. Effect of rare earth ions doping on the thermal properties of YAG transparent ceramics. J. Eur. Ceram. Soc. 2019, 39 (1), 53–58. DOI: 10.1016/j.jeurceramsoc.2018.04.018
Gregorová, E.; Pabst, W.; Nečina, V.; Uhlířová, T.; Diblíková, P. Young‘s modulus evolution during heating, re-sintering and cooling of partially sintered alumina ceramics. J. Eur. Ceram. Soc. 2019, 39 (5), 1893–1899. DOI: 10.1016/j.jeurceramsoc.2019.01.005

Book chapters

Pabst W., Uhlířová T., Hříbalová S., Nečina V.: Rigorous bounds, model predictions and mixture rule for the effective thermal conductivity of multiphase and porous ceramics – from theory to practice, Chapter 1 (pp. 1-138) in Sohel Murshed S. M. (ed.): An Essential Guide to Thermal Conductivity (ISBN hardcover 978-1-68507-196-7). 376 pp. Nova Science Publishers, New York 2021. DOI: 10.52305/MSNC3801
Uhlířová, T.; Hostaša, J.; Gregorová, E.; Pabst, W. Charakterizace keramických materiálů obrazovou analýzou. In Měření a řízení chemických, potravinářských a biotechnologických procesů. Díl II. Řízení technologických procesů Kadlec, K., Kmínek, M., Kadlec, P., Eds.; KEY Publishing: Ostrava, 2018; pp 303–309.
Pabst, W.; Uhlířová, T.; Nečina, V.; Gregorová, E. Basic concepts and classical models of solid state sintering. In Polycrystalline Materials: Synthesis, Performance and Applications, Olson, J., Ed.; Nova Science Publishers: New York, 2018; pp 1–64.
Pabst, W.; Gregorová, E.; Uhlířová, T.; Nečina, V. Mechanical and thermomechanical behavior of refractories: From basic concepts to effective property calculations. In Refractory Materials: Characteristics, Properties and Uses, Bryant, C., Ed.; Nova Science Publishers: New York, 2018; pp 33–132.
Uhlířová, T.; Gregorová, E.; Pabst, W. Direct foaming techniques for the preparation of cellular ceramics, their microstructural characterization and property-porosity relations – A review. In Advances in Porous Ceramics, Newton, A., Ed.; Nova Science Publishers: New York, 2017; pp 127–158.
Štětina, J.; Šárka, E.; Uhlířová, T.; Gregorová, E.; Pabst, W.; Bubník, Z. Měření velikosti částic, pórů a pórovitosti materiálů. In Měření a řízení chemických, potravinářských a biotechnologických procesů. Díl I. Provozní měření Kadlec, K., Kmínek, M., Kadlec, P., Eds.; KEY Publishing: Ostrava, 2017.
Pabst, W.; Gregorová, E.; Uhlířová, T. Processing, microstructure, properties, applications and curvature-based classification schemes of porous ceramics. In Advances in Porous Ceramics, Newton, A., Ed.; Nova Science Publishers: New York, 2017; pp 1–52.

Updated: 3.10.2024 15:20, Author: Tereza Unger Uhlířová